Plumbing Problems

Click here to edit subtitle

Blog

Plumbing: How to Fix Urinal Issues

Posted by [email protected] on September 8, 2020 at 8:20 PM Comments comments (44)

In attending the urinary problem in your comfort room, be aware that several issues correlate with its plumbing. Older urinals also tend to smell, caused by bacteria evolving in the uric sludge, biofilm, and limescale that make up the sewage and outlet sides. Another reason is because of seepage coming from the connection between the garbage can and the outlet. When the toilet has a problem, the urinals might be having issues, especially if the problem is mostly on the pipeline of the water system.


Methods in Repairing the Urinals


Since urinal is part of the plumbing issue, most homeowners find their remedy on how to fix it. Though not all people know what to do with this type of nasty problem, the typical way is to familiarize the process for taking the steps easier the next time you encounter the same issue.


However, it is best to leave this thing to professionals; they're just a call away like the plumber in Farmington Hills, MI.


Find the Secondary Water Shut Off

The second water shut off in your urinal is usually found in the first joint juts from your toilet wall or tile. Typically, a chrome cap will get used to hide it, but a screwdriver can easily pop off it. Sometimes, it can also be a black disk protruding from the pipe that runs over the toilet wall.


Stop Water Flow

Using a screwdriver, turn on the water supply that goes to the urinal by shutting off the water. Make your turn towards your left side. This process will effectively stop water from entering your urinal.


Flush Head Screw

Using the channel locks, turn on the bolt located at the top of your flush head. It is hexagonal or octagonal, and it is just like it on the head of the flush.


Remove the Flush Head Cap

To remove the head cap, you need to loosen the screw. When you release it, the water that remains on the head will drain. Do not worry about, this is normal.


Locate the Diaphragm

To find the diaphragm, look inside the flush head. It is a large disc that is black. It occupies most of the space inside the flush head. Therefore, it should be effortless for you to find it. Remove it and insert your new diaphragm.


Replace the Flush Head

When you have done the diaphragm replacement, place the flush head where it should be and screw the hexagonal or octagonal screw at the top in the same position.


Restore Water Supply

To restore the urinal water supply, shut off the second or to your right. Do this slowly.

Identifying Washing Machine Drain Problems

Posted by [email protected] on July 31, 2020 at 9:40 AM Comments comments (1)

Laundry is one of the hardest jobs of all house chores. They can only become easy when the washing machine is working. But if the appliance is not draining correctly, speculations arise. Most of the problems occurring can become dangerous and may cause problem to other appliances and the property too. But, if simple DIY's can help you to sort out the real cause so that costly repair is not going to happen you are lucky.

 

Figure Out the Cause

 

As you try to observe the drain cycle of the washing machine, figure out some common issues. Find out how you are going to deal with it using the guide of an appliance manual. How the machine works may not be complicated as you follow the procedures. Upgrade features of the washing machine automatically show error codes to identify any problems.

 

If you think this matter is too hard for you, do not attempt to do it on your own. You might cause an additional problem. Call a professional like the plumber in Surprise, AZ to rule out the problem and fix it.

 

Common Issues of Washing Machine

 

1. Clog in the rubber hose pipe from the washing machine to the standpipe drain

2. Any particle hold up the water pump filter

3. Mechanical deterioration of the water pump

4. The drive belt is broken or sloppy

5. The drain system is clogging

6. The lid switch is incorrectly situated

 

Some DIY for the Appliance

 

Drain hose. It frequently happens after you wash rugs that shed a lot of fabric fibers, or compressing the drain hose. This issue is the formidable reason why the water in the drain hose is not flowing correctly.

 

Try to remove the drain hose attached to the washer. Clear it first by blowing air through it. If nothing is blocking the tube, the issue might be on the washing machine pump. The tattered hose needs a replacement to increase the ability of the washing machine.

 

Drain pump Most pump has portable covers and filter screen inside. If you observe debris buildup on the screen, it is essential to clean it because it will most likely fix the problem.

 

Drive Belt. Pump won't work without a drive belt. Drive belt fits around pulleys on the base of the washing machine mechanism. The washing machine will not drain properly if this belt is not stable on the lifts. Turn the device over on its side to examine the strap for you to see how you can able to fix it. A simple DIY is what most people do, but calling an expert will help a lot if the problem is too technical.

 

 

Specific Problems of Your Toilet

Posted by [email protected] on June 29, 2020 at 10:15 AM Comments comments (44)

There are many things and circumstances that make your toilet problem repeats. The usual problem is a clog. Aside from the clog, it might be crack in your tank and others. For instance, you happen to experience this crack in the tank, consider the safety measures, and the other household members must know too.

 

The risk of harming yourself and your fellow bathroom users is big. Secondly, you can develop a leak that can damage the floor, ceiling, and a water source to feed a variety of mold and mildew that are minimally unhealthy and can be dangerous. The tanks are cheap enough, get a new one, and replace it.

 

How to Fix the Crack in Toilet Tank

 

The moment the toilet tank cracks, water will start to leak. You have to set priority on fixing the break because you’ll no longer be able to use the toilet once it starts. In this case, secure porcelain to temporarily fix the problem.

 

Before repair occurs, turn off the water, dry the tank to prevent the water from sneaking out. Be sure that the surface is dried. Porcelain will not work in wet areas. Do not pursue anyway if you are doubtful. You may be able to sort out the problem, but putting yourself into risk might not be a great solution. For further assistance on toilet repairs, please contact a professional plumber in Scottsdale, AZ.

 

Applying Porcelain

 

Any porcelain sealer is practically useful for this work. Try to check with the experts to see if the specific sealer is the right choice.

 

There is a porcelain sealer which you will most likely need a caulking gun. Fill the caulking gun with the sealer, wait for it to settle before you start. Carefully work your way down the crack and fill in the break with the sealer. To start an inch above the crack is most secure.

 

Be Sure to Smooth Out the Sealer

 

Try to smooth out the sealer with sandpaper, paper-knife, or any tool that will help spread out the sealer over the crack. This sealer will prevent other side cracks from starting and will make the toilet look better

 

Let the Sealer Dry Appropriately

 

The proper way to protect the sealer from leaking is to give it a day to perfectly dry once you already finish the sealing of the tank. Please do not use it right away. Letting it dry for 24 hours, will give stability of the sealer. Once the waiting is over, test the tank by turning on the water and see if it still leaks.

 

Common Problems of Water Heater

Posted by [email protected] on June 4, 2020 at 9:05 AM Comments comments (37)


 

Water Heater is invented to provide the right temperature to households. If your water heater is not functioning well, you will not have your desired hot water. Plus, it poses risks to your plumbing system and property.

 

Below are the common problems you might encounter in your water heater:

 

No Hot Water

 

Your water heater should give you hot water. If it doesn't work, check the pilot light. Make sure it is on. There are times that it is just turned off by someone in your family, so turn it on. If it turns on but still no hot water from the water heater, there must be a problem. Contact a plumber in Monument, CO to solve your problem. They are experts when it comes to water heater repair and installation.

 

Not Enough Hot Water

 

In the middle of using hot water and runs out of it is very frustrating. There are various why this happens. Your thermostat is the first one to be checked to ensure if it functions properly. If your water heater is new, you might have installed a small one that cannot sustain the entire household's needs. If this is the case, have a bigger one installed by a professional. But first, have it checked in case the cause is different to avoid spending much money. If you don't want to base your usage on tanks, consider a tankless water heater. It costs more than the traditional but you will never run out of hot water again. I tell you, it is worth your money and quite a good long-term investment for the family.

 

Water Temperature Not Right

 

Before you dial a plumber's number, check your thermostat settings first if it set too low or too high. Adjust your thermostat depending on your preference. If it gives you the right temperature then great. Problem solved. If it still doesn't give you the water at the right temperature, then there might be another problem. Sediments build-up can cause this to happen too. Draining the water heater and cleaning it before refilling can most of the time solve the problem if the cause is the build-up of sediments. If not, then it is time to call for professional help.

 

Colored Water

 

Water is colorless. So, if your water is colored then rust and corrosion might have eaten your tank or pipes. It is also the most common occurrence in the anode rod. If you don't replace your anode rod in time, you might need to buy a new water heater. It is important to call a plumber right away to prevent serious damage to your water heater.

 

Hot Water Heater Leaks

 

Having a broken drain valve can cause your hot water to leak. It is also common if there are piles of sediments inside your tank or if corrosion is happening. Call for a water heater repair if you notice leaks from your water heater. The earlier you detect the problem, the more you save on repairs and installations.

When Should I Have A New Water Heater?

Posted by [email protected] on May 26, 2020 at 10:00 PM Comments comments (471)

Most folks don’t know a water heater goes bad until they get nothing but cold water out of the faucet — but things don’t need to go that far if you’re aware of the clues that your water heater isn’t working quite right. If you see these signs, it’s time to call in professional help.

 

Here are the signs that you need to look for:

 

1. Rusty colored hot water

 

If your predicament is rusty, your hot-water heater might be rusting on the within, and it'd start leaking soon. To see if your predicament is rusty, fill three or four five-gallon buckets or other containers. If rust comes from predicament only, you almost certainly need a replacement hot-water heater.

 

2. Your water heater is leaking

 

While your hot-water heater is liable for providing predicament for your home, it is often a nasty sign if you discover water around this fixture. A leak or crack in your hot-water heater tank can cause water to pool up near its base. Call a plumber to ascertain if repair is feasible. Your plumber might be able to repair the leaks, but if not, you might need a new unit.

 

Take action immediately and call a professional like the plumber in Darien, CT for they have professional plumbers and repairmen that can guarantee you impeccable service and longevity of your water heater.

 

3. Your hot-water heater is 10 years old or more

 

Do you have any idea how old your hot-water heater is? These fixtures are typically designed to last between 8 and 10 years. If your water heater is approaching this age range, it may not be working as efficiently as it once did. This can result in higher bills and less comfortable showers. Talk to a plumber about your aging hot-water heater to examine if it will be repaired or should get replaced.

 

4. Loud noises coming from your water heater

 

A little noise is natural from your hot-water heater — in any case, it’s a serious appliance. But if you hear loud popping, banging, or cracking sounds coming from it, it’s time to call a repairman. Most likely, mineral deposits have built up and caused the appliance to overheat because it works to stay the water hot. If the tank hasn’t already started leaking, a flush and thorough cleaning could also be enough to stay it working.

 

5. Your hot water runs out quickly

 

“No predicament at all” could also be a no brainer, but fluctuating water temperature is simply the maximum amount of a clue that something’s wrong. It may mean that mineral deposits have built up around your water heater’s heating elements or that the heating elements got to be repaired or replaced.

How To Prevent Garbage Disposal From Leaks

Posted by [email protected] on May 25, 2020 at 10:00 AM Comments comments (215)

Leaking Garbage disposal can be quite frustrating because this makes the floor or cabinet under your kitchen sink severely wet. It could also lead to other water damages if you don’t get it fixed immediately.

 

Luckily, if you’re experiencing such a problem, you can handle this issue without contacting a plumber. To make things easier and less confusing, I will reveal to you how to stop this problem immediately before it started. But if the problem might get worse, I highly recommend to you plumber in Stuart, FL. They have great services when it comes to plumbing and I am very sure they can help you fix your problem.

 

Basic Tips On How To Prevent Garbage Disposal From Leaks

 

Do Not Throw Away Hard Waste into the Disposal Unit

 

Avoid allowing hard items to get into the rubbish grinder. If you want to know the specific types of waste that your unit can handle, consult the manual that comes with the package. If it’s a high-end model, it should grind items with a certain level of hardness. Hard food waste includes sturdy bones, shellfish parts, and stubborn corn kernels. Do not throw this waste into the grinder, it can damage the appliance. Instead, dump hard materials into your trash can or use it for compost.

 

Avoid Starchy or Fibrous Food Waste into the Grinder

 

When food fibers or starch gets in, like onion skins, fruit seeds, banana peels, corn cobs, and celery. Drains might become clogged. It is better to dispose of such materials properly by putting it in the trash can. A friendly reminder, do not crush eggshells with the unit as they can also block your plumbing.

 

Divide Large Waste into Tiny Portions

 

For extra-large waste like melon skins, dig smaller pieces and use the disposal unit. Ensure you put in as little trash as possible for an ideal and safe grind. But if you have many pieces to cut, ignore the waste disposal unit and use the compost heap or dustbin.

 

Flush with Cold Water

 

Once the waste is drained, run the grinder and faucet for 30 to 60 seconds. This action helps the waste move smoothly while the cold water prevents the disposer from heating up. Avoid hot water as it can build up melted fat that clogs piping.

 

Perform Regular Clean Ups

 

Turn the grinder and wipe out the inside of the rubber lying in the middle of the sink. You can use a paper towel for this task. If you forget to clean this component, it releases an unhealthy smell. Occasionally toss in some ice to remove any food residue on the shredder’s blade. This precaution allows the sting to grind waste correctly. For extra cleaning, free vinegar or lemon juice and dump the cubes into the appliance. If you want other options, try using an environmentally friendly cleaner.

 

Wrap Up

 

Garbage grinder leaks cause different problems. Even a disposer with visible cracks is additionally the rationale disposal leaking.

 

To solve garbage grinder leaks, replace the problematic parts, or get a new one. But you can prevent any damage and smells through regular cleaning. You should also avoid using the appliance to dispose of strong materials.

 

 

To Repair or To Replace: When is Replacement of Furnace Necessary?

Posted by [email protected] on May 14, 2020 at 5:45 AM Comments comments (60)

With the unpredictability of our weather, we are always encouraged to prepare our furnaces at home so, when we need them, they are in their best working condition. But before the cold weather could even kick in, is your furnace at home working at its finest? If not, maybe you need to call for a repair expert, or how about replacing it?


Most of the time, we find it more difficult to recognize whether our furnace at home needs to get repaired or entirely replaced. However, there are certain situations where a repair is the only solution while sometimes, a total replacement could be the only choice left for you to take.


But before even reaching your final decision, learn some of the most common factors you need to consider before repairing or replacing your furnace at home.


The Age of Your Furnace – your furnace’s age matter and it is a huge factor you may consider. Is your furnace installed 10-15 years ago? If so, there is a high possibility that your furnace might need replacement. According to research, a furnace may last for 15-30 years depending on its brand and other important factors. If your furnace happens to serve you for more than 15 years, then you might consider replacing it with a new one, but if your furnace is 10 years or less, calling a plumber in Denver, CO for repair is more cost-effective than buying a new one.


Growing Energy Bills – you might wonder sometimes why your energy bills continuously grow when there is no change or increase in your usage. Well, it might be because of your furnace. Furnaces over time may lose their efficiency especially if there is not enough maintenance. Start comparing your recent bills to the previous ones. Sometimes, it is often more advisable to buy a new one than paying so much for utility and bills every month.


Frequency of Repairs – the more frequent you need repair service, the more you should consider buying a new one. If you happen to notice that your furnace often requires major repair most of the time and the price of the repairs is almost 50% of the price of a new unit, then it might be the right time for you to buy a new one. If you are unsure, it is better to consult an HVAC expert to discuss this issue.


Noises coming from your Furnace – furnaces make a strange noise when they get old. That is because they double their effort and work harder that strange noises start to occur. When sounds like rattling, banging, or screeching occurs, it is best to contact an HVAC expert or just replace it with a new one.


The truth is, we can never tell when the best time is to replace our furnace at home. Some furnaces that are installed and used for many decades still function well.


But when such signs of total deterioration occur, replacing it with a new one is the best option.

Four Types of Faucets

Posted by [email protected] on April 29, 2020 at 3:20 AM Comments comments (77)

There are different types of faucets. It comes in different designs, sizes, and colors. The most common types of faucets are these 4: ball faucet, disc faucet, cartridge faucet (also known as two handles), and the compression washer faucet.

 

It is important to learn what type of faucet you have at home for easier purchase of parts if needed. Find out below what these designs are and how it works.

 

Ball Faucet

You can ball faucet commonly in kitchens. This faucet is washerless. This is called a ball faucet because it has a ball (can be plastic or metal) inside the body, which controls the water flow. The ball faucet has a single handle that is attached to the cap above the spout.

 

Disc Faucet

Disc faucet or ceramic disk faucet is one of the newest designs of faucet. It has a wide cylindrical body with a single lever on top. It has a pressure balance cartridge responsible for mixing hot and cold water. In controlling the flow of water in the faucet, there are ceramic disks in the bottom part of the chamber that raises and lowers down. This is the reason why it is called the disc faucet. This functions while rotating the handle in a side to side direction.

 

If you have concerns regarding your plumbing fixtures, you can contact a professional like the plumber in Birmingham, MI.

 

Cartridge Faucet (Two Handle)

This type of faucet is called cartridge faucet because a movable stem cartridge controls the water flow by moving up and down. If you turn the knob, you can feel the movement inside in an up and down direction. Try checking your faucet if it is a cartridge faucet.

 

Compression Washer Faucet

While the disc faucet is the newest design, the compression washer is one of the oldest design of faucets. If your home is built many years ago, it might have a compression washer faucet. However, there are also new homes that utilize this type of faucet. Compression washer faucet is a lot cheaper compared to other faucets. It works in a tight rotating motion to control the flow of water. This type of faucet has 2 handles. Do you want this type of faucet? Please note that this may be prone to leaking since the washers can wear out. If this happens, replacement is needed.

 

Now that you have learned the 4 common types of faucet, which one do you have at home? Share with us in the comment section.